{
  "r1_sha256": "580d87fa1d86bb24af64b15cb46c6af4c326eaef4bab213b69f010077d6cd8ef",
  "pcb": {
    "translation": [
      -41.794167,
      -71.6774669,
      -12.97149995
    ],
    "rotation": [
      180,
      0,
      0
    ],
    "front_z": -12.97149995,
    "rear_z": -14.30149995
  },
  "battery": {
    "pouch_front": -9.56000019073,
    "body_bottom": -16.55999995232
  },
  "closure": {
    "centers": [
      [
        -33.4,
        -56
      ],
      [
        33.4,
        -56
      ],
      [
        -33.4,
        56
      ],
      [
        33.4,
        56
      ]
    ],
    "pilot_end_z": -5.4,
    "seat_z": -17.9,
    "screw_length": 12
  },
  "front_clamp": {
    "centers": [
      [
        -17,
        -47
      ],
      [
        17,
        -47
      ]
    ]
  },
  "speaker": {
    "keeper_y": [
      18.4,
      65.6
    ]
  },
  "usb": {
    "center_y": -41.05429760118,
    "center_z": -15.4464,
    "mouth_x": -29.82730002915,
    "rear_x": -22.47729992915,
    "reaction_gap": 0.2,
    "body_width": 12.85,
    "body_height": 7
  },
  "mesh_linear_mm": 0.04,
  "mesh_angular_rad": 0.1,
  "provenance": {
    "author": "Local engineering integration of Adam MCP builder 314c4b3d; this parameter file is not a downloaded Adam parameter checkpoint.",
    "measured": "PCB transform fit to 306 corresponding source centroids: maximum residual 2.64e-9 mm. FR4/pouch and USB datums measured from exact supplied geometry. Closure XY taken from original R1 cylindrical pilot faces.",
    "selected": "Four closure seats atZ-17.9 use M2.5x12 socket screws and blind pilots endingZ-5.4. Speaker keeper centersY18.4/65.6 lie within supplied mounting ears. USB gauge body12.85x7 follows Adam builder geometry. PCB support regions and cable relief are defined in the builder from measured source geometry. Physical process, force and tolerance qualification remain open.",
    "patches": [
      "Hidden side drive-pad alignment",
      "Coordinated light-guide/cradle/keeper relief with0.20mm LED dome clearance",
      "Portable output-directory creation"
    ],
    "measured_fit_corrections": "Source-registered PCB edge supports; actual actuator swept passages; lower battery side rails clear front closure bosses; optical/acoustic installed soft goods; LTE header relief and hard-stop pockets; deeper closure seats with M2.5x12 screws; USB bridge pin clearance."
  }
}