{
  "digital_release_pass": true,
  "status": "CAD_FIRST_ARTICLE_PACKAGE; PHYSICAL_QUALIFICATION_REQUIRED",
  "manifest_sha256": "77d9a0a5675bf7fb0d123d983df8f920fc91d25a51c6047403f8f0ce551e793d",
  "part_count": 28,
  "screw_count": 32,
  "reference_group_count": 147,
  "risk_entry_count": 133,
  "coupon_pair_count": 32,
  "base_static_manifest_sha256": "6fdae6ead77e1f605f65ddccadd628b276b5eb5e7ae24ed651b96775a93649b2",
  "final_delta_chain": [
    "0f25b6ca9ec92d04fa69ef0e41d890fe89061cf416dba9ddac46588c400ab89d",
    "77d9a0a5675bf7fb0d123d983df8f920fc91d25a51c6047403f8f0ce551e793d"
  ],
  "review_rows": [
    [
      "Original exterior",
      "84 protected face domains, reverse surface occupation, containment, four caps/nubs and five retained masters pass. Native trim refinement is at most0.000976mm, within the original stored tolerance."
    ],
    [
      "Complete static assembly",
      "10,094 product/hardware/reference pairs and 10,731 reference pairs screened.22 thread and39 mating contacts are explicitly classified. Final removal-only cover/stock changes each pass206 local pairs."
    ],
    [
      "Fasteners",
      "All32 modeled heads clear. Full screw-centre witnesses and nominal original thread-crest envelopes clear unintended targets.22 engagements are confined to their specified pilot annuli."
    ],
    [
      "Driver access",
      "All32 straight diameter3mm by30mm shaft paths clear at documented assembly stages. Bumper fits last; adjacent wires are dressed after the affected keepers are tightened. Real bit and handle access remain untested."
    ],
    [
      "Operating controls",
      "All four controls have positive continuous nominal translation bounds: PTT uses the final full-reference rerun; play and both volumes inherit verified unchanged-input/removal-only evidence. All 32 selected small-angle probes clear, and all six simultaneous pressed pairs were recomputed. Physical switch travel, elasticity and guide tolerances remain unqualified."
    ],
    [
      "Native CAD and meshes",
      "28 valid product solids and watertight, consistently wound single-part STL meshes. All179 hardware/reference groups match native bounds, integrated solid volume and component quantities; open reference surfaces are accounted separately. Both Fusion archives reopen successfully."
    ],
    [
      "Local structure",
      "Critical roots, rails, keepers, bearings and pilot walls have dimensioned checks and documented load screens. Hypothetical effective material properties do not establish printed strength or fatigue life."
    ],
    [
      "Coupons and coverage",
      "32 checked STEP/STL coupon pairs; 133 feature risk entries cover all25 original and all3 added printed components, plus hardware, stock and wiring. Physical tests are unperformed."
    ]
  ],
  "evidence": [
    {
      "file": "audit/integrated/current_static_checks.json",
      "sha256": "36012515487ec982604f0ca67db68d7ddb7549a70d6c0cb705e1e65c5d16b331"
    },
    {
      "file": "audit/integrated/static_contact_classification.json",
      "sha256": "889bd1d9fe6e4b773363c4c6f76fd469b7c06408777f76595e681b558847e010"
    },
    {
      "file": "audit/integrated/reference_pair_checks.json",
      "sha256": "618aec82e0bf93068c41c059c12adac7384f7f8d250dc3976d1c94fc1e5fa170"
    },
    {
      "file": "audit/integrated/reference_pair_classification.json",
      "sha256": "c56b4ed6625c99eb092bf298db30fb6e4db2fca0ad1dffd00ab816938364b59b"
    },
    {
      "file": "audit/integrated/final_cover_delta_checks.json",
      "sha256": "f41f5bfca31b4ccb040943fd6fd530ed6828969278669175f95ba6e0e0a28f9c"
    },
    {
      "file": "audit/integrated/final_motion_stock_delta_checks.json",
      "sha256": "617edd6a8d0b57ff1c3ddf94db3169aa7f659bf5c832e3e786da9478b3f054ae"
    },
    {
      "file": "audit/fixtures/driver_access_final/FINAL_DRIVER_ACCESS_REPORT.json",
      "sha256": "ed49e6daff48456950d70c79422dc3990a1bde138d085caadf50677a078c38a3"
    },
    {
      "file": "audit/integrated/fastener_head_checks.json",
      "sha256": "a24df046f22350034101c853f76a34875028124b80a9275290980ecccc846d17"
    },
    {
      "file": "audit/controls/FINAL_CONTROL_INTEGRATION_REVIEW.json",
      "sha256": "466608b155f773324cd0751cec1c74c3c95cab9d642552a2828292289394b495"
    },
    {
      "file": "audit/controls/history/final_control_harness_6fdae.json",
      "sha256": "aa66a0ed3276c30f433aa679020064216366a8eb3d233e173283e77ddae1cf2b"
    },
    {
      "file": "audit/controls/final_ptt_harness.json",
      "sha256": "28877dd1e585484b6164333aed5a9d537c09fbef8ec6e2fc99d4b34d2d7142ab"
    },
    {
      "file": "audit/controls/core_geometry_provenance.json",
      "sha256": "a2b6abfbcfd85ca86eb88b16e1a38cf5ddbde7f1fa276ebdd9f9868bd8e2becd"
    },
    {
      "file": "audit/controls/combined_control_motion.json",
      "sha256": "2fcf0b6f739e2b2487292c9bd4b4bf201b7a257b0566ea8ddf3ecbf11e470cc2"
    },
    {
      "file": "audit/controls/K03_final_removal_delta.json",
      "sha256": "641e76d61928330e1103c9f0dbb7bbfceaf717c97070acf4758612093f81230e"
    },
    {
      "file": "audit/controls/exterior_native_final/SUMMARY.json",
      "sha256": "4321ba97dd7d801748f3506bf9adfed2289185e8a6b419edd8c4955fcdc90c63"
    },
    {
      "file": "audit/controls/exterior_native_final/FINAL_NATIVE_PROVENANCE_BRIDGE.json",
      "sha256": "59aac1b744a1b9f49f569ec20c5775bfcf45d1b78baf13a8b38336aef0068fe1"
    },
    {
      "file": "audit/controls/exterior_native_final/INPUTS.json",
      "sha256": "7fc0f30459dd81ad604d5e88ff07dea94304bde080f50c09de71b06e6dcfaf20"
    },
    {
      "file": "audit/native_export_checks.json",
      "sha256": "c4ddb78a0b329de1d9a2751c3c765ddc92e593c2114260a674d992deee7ee7a1"
    },
    {
      "file": "audit/native_reference_checks.json",
      "sha256": "9877e72b76f121fa58fae2890d1766a49f93c4dad80ac1418db3bb2483149305"
    },
    {
      "file": "audit/native_reference_resolution/RESOLUTION.json",
      "sha256": "102ca93909653ce55f6c7654791ac15b0545b79a96294cf1ff097842a21d2b25"
    },
    {
      "file": "audit/native_archive_reopen_checks.json",
      "sha256": "1ceb503a425b3af934a834675f2d30994946bb7eecc57305a6ed7b9d439ae6ec"
    },
    {
      "file": "audit/controls/K03_TERMINATION_CLEARANCE_FINAL_MANIFEST.json",
      "sha256": "a422489040796f88bf39b99539a8a1fd0a483e05297da5092fccfce2cf034474"
    },
    {
      "file": "audit/controls/K03_local_strength.json",
      "sha256": "06f6489d0d5f18311d0a960300e5a02278ef43c5f0afc466700900f130c88aa4"
    },
    {
      "file": "audit/fixtures/PTT_PAD_FINAL_CORRECTION_MANIFEST.json",
      "sha256": "c5ba95a4d2a84425bdf73a19764c76c5050791e5120897e3c2a14d236e9249d0"
    },
    {
      "file": "audit/fixtures/PTT_PAD_MOTION_CORRECTION_CHECKS.json",
      "sha256": "65f875d8241bd1253dded1d81bf7cb2e38b2eae7c500f0be4b5627b3019122ac"
    },
    {
      "file": "handoff/Coupons/Coupon_Manifest.json",
      "sha256": "7fa389e8a79ab530e2ce5ef37ec6197ca79b0fba565d34e55f1be875fcf4c921"
    },
    {
      "file": "handoff/Documents/Feature_Risk_Register.json",
      "sha256": "d94fea254ea77c6a46956e51160b39cd90446a9874f91c1d0ed82c612516b292"
    }
  ],
  "physical_tests_performed": false,
  "remaining_tests": [
    "Actual battery/tab/lead, switch click/release/overtravel, populated-board heights and installed stock measurements",
    "Process/material/orientation coupons, pilot/thread/torque qualification, support-removal and pull tests",
    "Ten complete assembly/service cycles and1000 actuations per control, centre and edges including PTT ends",
    "Electrical continuity/polarity/current, charging, acoustic, optical and RF checks"
  ],
  "exterior_representation": {
    "resolved_within_source_representation_tolerance": true,
    "part": "P02",
    "source_face": 33,
    "maximum_bidirectional_trim_edge_difference_mm": 0.0009760514295940561,
    "source_edge_stored_tolerance_mm": 0.0010345045718860827,
    "original_edge_radial_error_mm": -0.0009760631530415509,
    "native_edge_radial_error_mm": -1.85104358507715e-08,
    "same_analytic_cylinder": true,
    "P01_matching_edge_max_mm": 0.0008964344618015961,
    "meaning": "Nominal dimensions and underlying exterior surfaces are retained. Native export refines an original B-spline trim within its stored tolerance; native edge coordinates are not bit-identical or zero-deviation. The face-to-whole-boundary area overcount is resolved by separately valid face-to-face comparisons and analytic-surface evidence."
  },
  "claims_limit": "Nominal CAD geometry and digital handoff integrity only. No guarantee of universal printing compatibility, physical durability, switch safety margin or RF performance."
}